Roll-Up Light Duty Sheet Door Model DS-100

The DS-100 Series Roll-Up Sheet door is designed to be versatile, durable and easy to operate. Each door in the DS Series is constructed of 26-gauge, galvanized steel and features automatic door stops, a steel axle to support the door curtain and counterbalance system and oil-tempered steel springs for smooth cycle performance. With a variety of colors, options and sizes to choose from, these doors will fit almost any commercial application.

These light duty sheet doors are perfect for light commercial applications with openings up to 10’ wide by 10’ high, such as mini-storage buildings, loading docks, and service buildings. 18-gauge guides allow for easy installation to masonry or steel with no special preparation or overhead tracks needed.

This roll-up sheet door can be used for an interior door system.

Key Product Features

  • Max Width: 10’
  • Max Height: 10’
  • 26-gauge galvanized steel
  • Manual lift operation

Product Information

  • Corrugated door curtain, available in round profile, is hot-dipped galvanized 26-gauge steel, primed then finished with high gloss, silicone polyester paint.
  • Polypropylene anti-wear strips come factory-installed as continuous guides for sliding metal parts, providing quieter operation and longer service life.
  • Rigid support bracket with bearings hold constant door tension, and allow easy adjustments.
  • Bottom bar assembly includes heavy-duty steel angle, extruded aluminum bottom bar and replaceable tubular-type vinyl astragal.
  • Slide-bolt assemblies fabricated of heavy-duty steel lock the closed door from inside at the bottom corners (not shown; door has optional mini curtain lock.) For added security, both slide bolts accept padlocks.
  • Roll-up door guides are 18-gauge galvanized steel, 2″ wide and install to masonry, steel or wood construction equally well.
  • Automatic door stops prevent door from rolling up past the header.
  • Oil-tempered steel spring is engineered to counterbalance different door sizes and weights for smooth, easy operation.
  • Heavy-duty steel axle supports door curtain and counterbalance system.

Options & Accessories

  • Wind load available up to ±34 psf on doors 10’ maximum in width
  • Insulation featuring two layers of aluminum mylar film laminated to two layers of heavy-duty polyethylene air-bubble material. An R-value* of 4 helps control heat gain/loss. Includes flexible vinyl top and side draft stops as weather seals between the door and the building.
  • Locks: slide bolt or curtain

*Wayne Dalton uses a calculated door section R-value for insulated doors.

Color Options

White

Mist-White

Yellow

Sunset Orange

Polar Blue

Royal Blue

Cedar Red

Desert Tan

Teal

Brown Bronze

Valentine Red

Patriot Red

Sea Green

Fern Green

Hunter Green

Maroon

Purple

Continental Brown

The Teal, Tangerine, Maroon, and Purple colors have a 10-year warranty against chalk and fade. All other door colors have a 20-year warranty against chalk and fade.

Online color swatches are only digital reproductions of actual standards and will vary in appearance due to differences in monitor and video card output. These digital representations should not be used to finalize color selection(s). Please contact your local Wayne Dalton Dealer for actual color samples to match with your home or business.

FEATURES

Key Product Features

  • Max Width: 10’
  • Max Height: 10’
  • 26-gauge galvanized steel
  • Manual lift operation

Product Information

  • Corrugated door curtain, available in round profile, is hot-dipped galvanized 26-gauge steel, primed then finished with high gloss, silicone polyester paint.
  • Polypropylene anti-wear strips come factory-installed as continuous guides for sliding metal parts, providing quieter operation and longer service life.
  • Rigid support bracket with bearings hold constant door tension, and allow easy adjustments.
  • Bottom bar assembly includes heavy-duty steel angle, extruded aluminum bottom bar and replaceable tubular-type vinyl astragal.
  • Slide-bolt assemblies fabricated of heavy-duty steel lock the closed door from inside at the bottom corners (not shown; door has optional mini curtain lock.) For added security, both slide bolts accept padlocks.
  • Roll-up door guides are 18-gauge galvanized steel, 2″ wide and install to masonry, steel or wood construction equally well.
  • Automatic door stops prevent door from rolling up past the header.
  • Oil-tempered steel spring is engineered to counterbalance different door sizes and weights for smooth, easy operation.
  • Heavy-duty steel axle supports door curtain and counterbalance system.
DOOR OPTIONS

Options & Accessories

  • Wind load available up to ±34 psf on doors 10’ maximum in width
  • Insulation featuring two layers of aluminum mylar film laminated to two layers of heavy-duty polyethylene air-bubble material. An R-value* of 4 helps control heat gain/loss. Includes flexible vinyl top and side draft stops as weather seals between the door and the building.
  • Locks: slide bolt or curtain

*Wayne Dalton uses a calculated door section R-value for insulated doors.

COLORS

Color Options

White

Mist-White

Yellow

Sunset Orange

Polar Blue

Royal Blue

Cedar Red

Desert Tan

Teal

Brown Bronze

Valentine Red

Patriot Red

Sea Green

Fern Green

Hunter Green

Maroon

Purple

Continental Brown

The Teal, Tangerine, Maroon, and Purple colors have a 10-year warranty against chalk and fade. All other door colors have a 20-year warranty against chalk and fade.

Online color swatches are only digital reproductions of actual standards and will vary in appearance due to differences in monitor and video card output. These digital representations should not be used to finalize color selection(s). Please contact your local Wayne Dalton Dealer for actual color samples to match with your home or business.

DOCUMENTS
WARRANTY

CALL NOW (405) 720-7107
DOORTEC TECHNICIANS ARE READY
TO ANSWER YOUR QUESTIONS

WE ARE HAPPY TO HELP!