Dock Seals

P Series

Model P Polyurethane Foam

  • Maximum energy savings -weather tight closure
  • 100% lock-stitched seams -double stitched seams on Wear Shingle models
  • All models use highest grade of materials available
  • Fabric weight protection from 40 oz. to 140 oz.

PF Series

Model PF Head Curtain (in lieu of head pad)

  • Non-sagging head curtain design utilizes 3/4″ galvanized pipe for front edge support
  • Hybrid design head curtain with foam layer (4″) on curtain plus extra fabric cover (optional)
  • Custom design available for special sealing needs
  • Most effective for doors of oversize height
  • Rope pull up (optional)

L Pad Series Model (L)

  • Allows greater access to rear of trailer
  • Side pads provide shelter like wiper action, yet seal the sides of the trailer

PA Series

Model PA Adjustable Head Pad

  • Metal hoods recommended with these models
  • Full-range manual adjustment with center pull-down strap
  • Single weighted counterbalanced adjustment
  • Full 18″ of head pad vertical move­ment to service a wide range of truck heights
Dock Shelters

Dura Seal

Extended Warranty Dock Seal

  • LTA material (our high tear PX25) base materials 8″ Exposure wear pleats
  • 20″ wide, PX420 wear pleats on the corners of the head pad. On head curtain models the wear pleats are the same width as the side pad. Helps protect in case of mis-spotted trailers.
  • PX420 inside wear face on bottom. 48″ of each side pad. Protects against forklift/pallet damage
  • Three (3) Year Warranty

R Series

  • Model R Rigid Frame Truck Shelters Raked cut header on all rigid woo frame models allows for water runoff
  • Side and top curtain wiper action allows for full access to rear of truck
  • Automatic variable truck height coverage from 11′ to 13’6″
  • Heavy duty structural channel bumpers for protection and support

F Series

Model F Flexible Truck Shelter Metal hoods recommended with these models

  • Choose from four (2) flexible models
  • All spring loaded for snug fit to trailer
  • Corrosion-resistant steel framing
  • Reinforced wear area for lasting durability
Dock Seal Features
  • Weather tight enclosure for maximum energy savings
  • 100% lock-stitched seams-double stitched on wear shingle models
  • Assorted colors
  • 4″ full length yellow guide strap standard
  • Head curtain models available with or without foam
  • Counterbalanced adjustable head pad available
  • Metal hoods
  • All models use highest grade materials available
  • Fabric weight protection from 40 to 140 oz.
  • Pressure treated wood backing – steel backing optional
Dock Shelter Features
  • Raked cut header on all rigid wood frame models prevents water from standing on top
  • Heavy duty structural channel support/protective bumpers with rigid type units
  • Overlapping weather shingles on head curtains
  • Side and head curtain wiper action allows full access to rear of truck
  • Face curtains on rigid type include scotch ply fiberglass stays and yellow guide stripes
  • Rigid frame models have 6oz. translucent white fiberglass top cover
  • Side covers translucent 28 oz. P.V.C. base fabric or 6 oz. translucent fiberglass
Optional Features and Equipment

Galvanized Metal Hood for overhead protection of seals and flexible shelters

Common Member Units Seals or Rigid Shelters for dock doors that are closer than standard.

Larger Head Pad Height for high doors and broader range of truck heights

Blockouts for extra protection when full projection foam is not desirable

Tapered Units for inclined or declined truck approaches

Wear Shingles add years of extra life to seals

Warranty

Dock seals and shelters are guaranteed against defects in material and workmanship for (1) one year.

Pioneer accepts full responsibility for the cost of materials, labor, and freight for any warranty claim and reserves the. right to either repair or replace any defective parts.

PIONEER MANUFACTURING. INC. SHALL NOT BE LIABLE FOR THE LOSS OF USE OF ANY EQUIPMENT OR INCIDENTAL DAMAGES. PIONEER EXPRESSLY DISCLAIMS ANY AND ALL IMPLIED WARRANTIES.

FEATURES
Dock Seal Features
  • Weather tight enclosure for maximum energy savings
  • 100% lock-stitched seams-double stitched on wear shingle models
  • Assorted colors
  • 4″ full length yellow guide strap standard
  • Head curtain models available with or without foam
  • Counterbalanced adjustable head pad available
  • Metal hoods
  • All models use highest grade materials available
  • Fabric weight protection from 40 to 140 oz.
  • Pressure treated wood backing – steel backing optional
Dock Shelter Features
  • Raked cut header on all rigid wood frame models prevents water from standing on top
  • Heavy duty structural channel support/protective bumpers with rigid type units
  • Overlapping weather shingles on head curtains
  • Side and head curtain wiper action allows full access to rear of truck
  • Face curtains on rigid type include scotch ply fiberglass stays and yellow guide stripes
  • Rigid frame models have 6oz. translucent white fiberglass top cover
  • Side covers translucent 28 oz. P.V.C. base fabric or 6 oz. translucent fiberglass
OPTIONS
Optional Features and Equipment

Galvanized Metal Hood for overhead protection of seals and flexible shelters

Common Member Units Seals or Rigid Shelters for dock doors that are closer than standard.

Larger Head Pad Height for high doors and broader range of truck heights

Blockouts for extra protection when full projection foam is not desirable

Tapered Units for inclined or declined truck approaches

Wear Shingles add years of extra life to seals

COLORS
WARRANTY
Warranty

Dock seals and shelters are guaranteed against defects in material and workmanship for (1) one year.

Pioneer accepts full responsibility for the cost of materials, labor, and freight for any warranty claim and reserves the. right to either repair or replace any defective parts.

PIONEER MANUFACTURING. INC. SHALL NOT BE LIABLE FOR THE LOSS OF USE OF ANY EQUIPMENT OR INCIDENTAL DAMAGES. PIONEER EXPRESSLY DISCLAIMS ANY AND ALL IMPLIED WARRANTIES.