Insulated Sectional Steel Door Model 200

Wayne Dalton Thermospan^® Model 200 provides premium thermal efficiency and low maintenance costs, resulting in a door that costs less to own. Continuous foamed-in-place polyurethane insulation and a non-conductive thermal break between the inner and outer skins combine to provide a U-value* of .057 and an R-value* of 17.50.

The Wayne Dalton Thermospan^® Series doors are the only sectional doors in the industry with patented, roll-formed integral struts on each section, making them the most rigid doors available. The Thermospan^® Series also has a patented manufacturing process with a polyurethane core that is continuously foamed-in-place between the outer and inner skins. An innovative thermal break keeps the interior skin at room temperature, preventing condensation and frost and helping to resist corruption.

*Wayne Dalton uses a calculated door section R-value and U-value for insulated doors.

FEATURES
DOOR OPTIONS
COLORS
DOCUMENTS
WARRANTY

Key Product Features

Max Width: 40’2”
Max Height: 32’1”
Polyurethane insulation, R-value* = 17.5, U-value* = .057
2” section thickness
10,000 cycle standard spring
Patented, roll-formed integral struts for rigidity
Embossed stucco exterior with pinstripes

*Wayne Dalton uses a calculated door section R-value and U-value for insulated doors.

IECC® Compliant

The Thermospan^® Model 200 meets IECC^® requirements for maximum U-factor of operable fenestrations (2015 Section C402.4) with a 3rd party certified tested value of less than 0.37. Thermospan^® Model 200 also meets the ASHRAE 90.1 and IECC^® requirement for maximum air leakage for fenestration assemblies (2015 Section C402.5.2 Garage doors) with a 3rd party certified tested value of less than 0.40.

Door Construction

Joint seal prevents air infiltration and saves energy
Thermal break separates inner and outer skins so virtually no heat or cold is conducted through the section.
Pre-painted inner and outer skins for added corrosion resistance. Both skins are also hot-dipped galvanized steel for further protection against corrosion.
Solid polyurethane core provides maximum thermal efficiency and aids in quiet operation
Integral struts – Two 1-3/4” roll-formed struts per section increase rigidity and strength.
Two-inch nominal thickness
Embossed pinstriping (grooves) on the embossed stucco outer skin adds strength and enhances appearance.

Lite Options

Vision Lites

Full-View Lites

Insulated Vision Lites allow for visibility while maintaining security. Full-view sections allow for maximum natural light and visibility.

Options & Accessories

Pass door
Chain hoist operation
Motor operation
Sensing edges
Photo eyes
High cycle spring (25k, 50k, 100k)
3” track option
Solid shafts
Perimeter weather seal
Special track designs
Mullions

Impact Panel

Wayne Dalton’s optional Impact Section replaces the traditional bottom section on doors exposed to damage from forklifts and other warehouse traffic.

Reduces downtime and costly repairs
Impact-Resistant composite skins surround an expanded polystyrene core
Fully adaptable to multiple door thicknesses with hinge and section adapters to provide a superior fit
Available for 21″ and 24″ sections
Available from 8’2” to 16’2” wide in one-foot increments

*Static and Impact Wind Load designs are certified by the state of Florida (FBC), the Texas Department of Insurance (TDI), and the designs are compliant with the 2015 IBC. No Miami DADE certifications.

Color Options

White Stucco

Tan Stucco

Brown Stucco

Documents

Sectional Steel Door ThermoSpan Door™ Model 200 Brochure

Sectional Door Systems Brochure

Model 200 Wind Load Options