Name: Wayne Dalton Model 800 Rolling Service Door
Brand: Wayne Dalton

Product Info

All specifications sourced from Wayne Dalton's official Model 800 product documentation. Contact DOORTEC at (405) 720-7107 for custom sizing or application-specific configurations.

Construction
Insulation	Non-insulated — single-layer curtain construction
Slat Profile	Curved or flat-faced slats — both provide natural watershed to reduce corrosion
Slat Joints	Free-acting interlocking joints — permit easy articulation when curtain coils
Bottom Bar	Strong double-angle bottom bar — no fasteners required in guide openings
Counterbalance	Spring barrel assembly — serves as load-carrying beam, encases counterbalance mechanism
Materials
Curtain Material	Galvanized steel (G-90) · Primed steel · Stainless steel · Aluminum
Locking Options	Slide bolts · Cylinder lock · Best lock · Thumb turns
Bottom Bar Options	Stainless steel double angle · Structural steel angle (galvanized only) · Extruded aluminum · Sloped
Sizing
Maximum Width	Up to 42' wide (larger sizes may be available — consult factory)*
Maximum Height	Up to 30' high (larger sizes may be available — consult factory)*
Size Note	Max height and width are independent — may vary based on slat profile, material, and gauge
Wind Load
Standard Wind Load	±20 psf standard
Optional Wind Load	WindSafe® reinforcement available — contact DOORTEC for specific requirements
Finish
Standard Colors	White, Beige, Gray, Brown (polyester factory finish)
Powder Coat Options	Approximately 200 RAL powder coat colors — custom color matching available

*Maximum height and width are independent of each other and may vary based on slat profile, material, and gauge. Consult DOORTEC for specific requirements.

The Model 800 is Wayne Dalton's standard commercial rolling service door — a proven, reliable non-insulated coiling door suitable for interior openings and exterior applications where thermal performance is not the primary requirement.

Curved or flat-faced slat options — both profiles provide natural watershed to help water drain off the curtain face and reduce long-term corrosion

Free-acting interlocking slat joints allow smooth articulation as the curtain coils — reducing stress concentrations during operation cycles

Double-angle bottom bar installs without fasteners protruding into guide openings — door operates freely with no bottom bar interference throughout its travel

Spring barrel counterbalance assembly encases the mechanism and provides the axis for coiling — compact overhead profile that maximizes usable door opening height

Standard ±20 psf wind load resistance — WindSafe® optional reinforcement available to meet local OKC building code requirements

Material flexibility — galvanized (G-90), primed, stainless, or aluminum curtain to match corrosion resistance or hygiene requirements

Approximately 200 powder coat finish options to match your building exterior or corporate color standards

High Cycle 800 HC variant available — 500,000-cycle springless design for facilities requiring more than standard cycle life

The Model 800 is the right choice for interior openings and exterior applications where the primary requirements are security, durability, and reliable daily operation — rather than thermal separation. Popular across a wide range of commercial facilities.

Distribution Centers

Storage Facilities

Industrial Facilities

Municipal Buildings

Loading Docks

First Responder Facilities

Retail Buildings

Manufacturing Plants

Production Facilities

The Model 800 is configured to your application — material, gauge, finish, locking, and operator selections are all specified at time of order. Contact DOORTEC to discuss which options are right for your facility.

Slat Profile: Curved (#2 slat) · Flat-faced — both provide natural watershed; curved profile adds visual depth

Curtain Material: G-90 galvanized steel · Primed steel · Stainless steel · Aluminum — multiple gauge options per material

Bottom Bar: Stainless steel double angle · Structural steel angle · Extruded aluminum · Sloped

Locking: Slide bolts · Cylinder lock · Best lock · Thumb turns

Wind Load: Standard ±20 psf · WindSafe® reinforcement options available

Finish: White · Beige · Gray · Brown standard · ~200 powder coat RAL options · Custom color match

High Cycle Upgrade: Model 800 HC — 500,000 cycle springless design with 3-year cycle warranty for high-traffic applications

DOORTEC installs the Wayne Dalton Model 800 throughout Oklahoma City, Edmond, Norman, Moore, Yukon, Midwest City, Guthrie, El Reno, and Tulsa. Our factory-trained commercial technicians handle site assessment, specification, installation, and commissioning.

DOORTEC Commercial Installation Process
Site Assessment	We measure the opening, assess header clearance, identify mounting structure, and specify the correct door size, slat profile, and material for your application.
Specification	We spec curtain material, gauge, slat profile, bottom bar, locking type, wind load requirement, finish color, and operator based on your duty cycle and use case.
Installation	Factory-trained technicians install guides, barrel, curtain, bottom bar, and operator to Wayne Dalton specifications.
Operator Setup	Full operator programming, travel limit adjustment, and safety device commissioning before leaving the site.
Safety Testing	Full safety reversal test and photo-eye alignment verification before sign-off.
Service Coverage	Oklahoma City · Edmond · Norman · Moore · Yukon · Midwest City · Guthrie · El Reno · Tulsa

Model 800 Installation in Oklahoma City

The Wayne Dalton Model 800 is one of the most widely used commercial rolling service doors in Oklahoma City warehouses, distribution facilities, and industrial buildings. It's a proven, dependable non-insulated door for interior openings and exterior applications where the priority is reliable security closure rather than thermal performance. DOORTEC installs the Model 800 throughout Oklahoma City, Edmond, Norman, Moore, Yukon, Midwest City, Guthrie, El Reno, and the surrounding OKC metro.

When thermal separation is a requirement, we typically recommend the insulated ThermoTite® 800C — but for interior openings between adjacent non-conditioned spaces, the Model 800 delivers the same operational reliability at a lower installed cost. Call DOORTEC at (405) 720-7107 for a free commercial site assessment and specification quote.

Commercial Rolling Door Installation Tulsa & OKC

DOORTEC's commercial division serves both Oklahoma City and Tulsa with the Wayne Dalton Model 800 and the full commercial rolling steel door line. Our Tulsa location at 1835 N 106th E Ave handles commercial door installations and service calls throughout the Tulsa metro area with the same factory-trained technicians and parts inventory as our Oklahoma City operation.

Whether you need a single replacement door for an existing facility, multiple openings for a new warehouse build-out, or emergency service on an existing installation, DOORTEC responds quickly for commercial customers. For high-traffic applications requiring more than standard cycle life, ask about the Model 800 HC — a springless high cycle variant rated for 500,000 cycles.