All specifications sourced from Wayne Dalton's official FireStar® 700C product documentation. Contact DOORTEC at (405) 720-7107 for sizing, slat profile, and configuration details for your specific opening and fire protection requirements.
| Fire Rating & Listings | |
| UL Listing | Underwriters Laboratories listed |
| Factory Mutual | Factory Mutual approved |
| NFPA Standard | Conforms to NFPA Standard 80 |
| Insulation | |
| Insulation Type | Non-combustible mineral wool insulation |
| Flame Spread | 0 (mineral wool insulation — does not contribute to flame spread) |
| Smoke Development | 0 (mineral wool insulation — does not contribute to smoke development) |
| Release Mechanism | |
| FireStar® Design | Patented planetary gear drop mechanism — disconnects operator and drops door in the event of fire |
| Auto-Reset | Standard auto-reset feature — door can be drop-tested and reset at any time by anyone without tools |
| Non-Tension Release | Simply open the door to reset drop mechanism after an event — no spring tension reset required |
| Cycle Life | Factory-tested and approved for minimum 20,000 cycles |
| Construction | |
| Standardized Components | One standardized component design for all FireStar® doors regardless of size — fewer parts, more accurate installations |
| Bottom Bar | Two equal angles, 0.121" min thickness, to stiffen curtain |
| Counterbalance | Helical springs, oil-tempered torsion type; 20,000-cycle rated |
| Hood | Minimum 24-gauge galvanized or stainless steel — flanged at top for header attachment, flanged at bottom for longitudinal stiffness |
| Sizing | |
| Maximum Size | Contact DOORTEC — max height and width are independent and vary based on slat profile, material, and gauge** |
| Wind Load | |
| Wind Load Options | WindSafe® wind load reinforcement available · FBC HVHZ certified up to ±55 psf |
| Finish | |
| Standard Colors | Four standard polyester finish colors |
| Powder Coat Options | Approximately 200 powder coat options available |
| Warranty | |
| Coverage | 24-Month Limited Warranty on all product parts and components |
**Maximum height and width are independent of each other and may vary based on slat profile, material, and gauge. Wayne Dalton uses a calculated door section R-value for insulated doors.
The FireStar® 700C combines Wayne Dalton's innovative FireStar® drop mechanism with mineral wool insulation — delivering both fire containment and thermal separation in a single assembly suited to climate-controlled facilities that also require fire-rated protection.
The FireStar® 700C is the right specification for fire-rated openings in climate-controlled facilities — combining UL-listed fire protection with mineral wool insulation in a single door assembly.
The Model 700C is configured to your application. Contact DOORTEC at (405) 720-7107 to discuss the right configuration for your facility and fire protection requirements.
Wayne Dalton backs the Model 700C with manufacturer warranty coverage. DOORTEC's installation workmanship guarantee is provided on top of all manufacturer coverage.
DOORTEC installs the Wayne Dalton Model 700C throughout Oklahoma City, Edmond, Norman, Moore, Yukon, Midwest City, Guthrie, El Reno, and Tulsa. All fire door installations are completed per NFPA 80 requirements by our factory-trained commercial technicians.
| DOORTEC Commercial Installation Process | |
| Site Assessment | We assess the opening, header clearance, wall construction, and fire door listing requirements to specify the correct model and configuration for your facility. |
| Specification | We specify curtain material, gauge, finish, slat profile, operator type, and any required accessories based on your fire protection and code requirements. |
| Installation | Factory-trained technicians install the complete fire door system to Wayne Dalton specifications — guides, barrel, curtain, bottom bar, release mechanism, and operator. |
| Drop Test | Full drop test verification before sign-off — confirming the release mechanism triggers and the door drops and seats correctly. |
| Code Compliance | All installations are completed per NFPA 80 requirements. DOORTEC provides documentation for the AHJ (Authority Having Jurisdiction) as required. |
| Service Coverage | Oklahoma City · Edmond · Norman · Moore · Yukon · Midwest City · Guthrie · El Reno · Tulsa |
The Wayne Dalton FireStar® 700C is DOORTEC's specification for Oklahoma City facilities requiring fire-rated door protection in climate-controlled openings. The mineral wool insulation's flame spread and smoke development values of 0 — the best possible performance — make it a meaningful upgrade over standard fire doors in food processing, pharmaceutical, and climate-controlled distribution applications where both thermal performance and fire protection are code requirements.
DOORTEC installs the FireStar® 700C throughout Oklahoma City, Edmond, Norman, Moore, Yukon, Midwest City, Guthrie, El Reno, and the OKC metro. All fire door installations are completed per NFPA 80 requirements by our factory-trained technicians. The auto-reset drop mechanism means your facility's fire door testing program is simpler and less costly over the life of the installation. Call (405) 720-7107 for a free commercial site assessment.
DOORTEC's Tulsa location at 1835 N 106th E Ave serves the greater Tulsa metro with the Wayne Dalton FireStar® fire door line. Tulsa's substantial food processing, pharmaceutical, and climate-controlled manufacturing infrastructure includes many facilities where fire-rated insulated doors are a code requirement — and where the 700C's mineral wool insulation provides the best available combination of fire performance and thermal separation.
For both Oklahoma City and Tulsa commercial construction projects where an AHJ (Authority Having Jurisdiction) requires documentation of fire door listing and compliance, DOORTEC provides the necessary UL listing documentation and NFPA 80 installation records. Contact us at (405) 720-7107 or doortec.com to discuss your fire door requirements.