Wayne Dalton Model 451 Aluminum Full-View Sectional Door

Product Info

All specifications sourced from Wayne Dalton's official Model 451 product documentation. Models 451 and 452 are available in the Central and Eastern regions of the United States. Contact DOORTEC at (405) 720-7107 for sizing and configuration details.

Frame Construction
Frame Material	Stile and rail assembly of aluminum alloy 6063-T6
Stile & Rail Thickness	1-3/8" thick — joined with self-tapping screws
End Stiles	3-1/2" wide single end stiles; center stile 3" wide; min. wall thickness 0.062"
Rails	Top and bottom rails 3-1/2" wide; upper intermediate rail 1-5/8"; lower intermediate rail 1-3/8"
Thermal Performance
Standard	Non-insulated standard configuration
Optional Insulation	Polyurethane-filled insulated rails and stiles available — contact DOORTEC for R-value
Air Infiltration	Meets IECC® requirements — third-party tested below 0.4 cfm/ft²
Glazing & Panels
Glass Options	Multiple thickness and type options — contact DOORTEC for current glazing selections
Panel Alternatives	Solid aluminum panels · Polycarbonate · Custom glazing available
Wind Load & Finish
Wind Load	Up to ±30 psf — 2015 IBC static/non-impact design compliant
Standard Finish	Clear anodized aluminum
Powder Coat Options	Approximately 200 RAL powder coat colors available
Locking & Weather
Locking	Interior slide lock · Keyed lock · Keyed lock with interlock switch for automatic operator
Weather Stripping	Jamb and header seals standard
Availability
Region	Central and Eastern regions of the United States

Models 451 and 452 available in Central and Eastern regions of the United States. *Wayne Dalton uses a calculated door section R-value for insulated doors.

The Model 451 is Wayne Dalton's full-view aluminum glass door — engineered for strength and durability while delivering a contemporary aesthetic suited to commercial applications where visibility, natural light, and design are all priorities.

Aluminum alloy 6063-T6 stile and rail construction provides structural-grade strength, excellent corrosion resistance, and a clean architectural finish for high-visibility commercial settings

Full glass sections deliver maximum natural light and visibility — the door functions as an open wall when raised, creating indoor-outdoor environments for restaurants, breweries, and showrooms

Optional polyurethane-filled insulated rails and stiles improve thermal performance for climate-controlled applications without compromising the full-view aesthetic

Solid aluminum panel substitution available for any section — lower panels can be specified as solid aluminum for protection, privacy, or security while maintaining upper glass sections

IECC-compliant air infiltration below 0.4 cfm/ft² — third-party tested to meet current energy code requirements for commercial buildings in Oklahoma and surrounding states

Wind load up to ±30 psf — per 2015 IBC engineering analysis, suitable for Oklahoma City commercial construction requirements

Approximately 200 powder coat options plus clear anodized standard — precise color coordination with building exterior or corporate standards

The Model 451 is the right choice for commercial openings where natural light, visibility, and a premium aluminum aesthetic are priorities. Popular across a wide range of upscale commercial and hospitality applications.

Auto Dealerships

Restaurants & Bars

Car Washes

Service Bays

Showrooms

Distribution Centers

The Model 451 is configured to your application at time of order. Contact DOORTEC at (405) 720-7107 to discuss which options are right for your facility.

Insulation: Standard non-insulated · Optional polyurethane-filled insulated rails and stiles

Glass Thickness: Multiple options — contact DOORTEC for current glazing selections

Panel Material: Glass (standard) · Solid aluminum · Polycarbonate · Custom glazing

Finish: Clear anodized standard · Approximately 200 powder coat RAL options

Locking: Interior slide lock · Keyed lock · Keyed lock with interlock switch for automatic operator

Wind Load: Up to ±30 psf — per 2015 IBC engineering analysis

Wayne Dalton backs the Model 451 with manufacturer warranty coverage. DOORTEC's installation workmanship guarantee is provided on top of all manufacturer coverage.

Contact DOORTEC for Warranty Details Wayne Dalton provides warranty coverage on the Model 451. Contact DOORTEC at (405) 720-7107 for current warranty terms applicable to your specific configuration.

Wayne Dalton manufacturer warranty on materials and workmanship — contact DOORTEC for current terms

DOORTEC Workmanship Guarantee — any installation issue corrected at no charge

DOORTEC installs the Wayne Dalton Model 451 throughout Oklahoma City, Edmond, Norman, Moore, Yukon, Midwest City, Guthrie, El Reno, and Tulsa. Our factory-trained commercial technicians handle the full scope — site assessment through commissioning.

DOORTEC Commercial Installation Process
Site Assessment	We measure the opening, assess header clearance, review structural mounting, and confirm all specifications for your facility.
Specification	We specify the correct door configuration, finish, glazing or insulation option, wind load requirement, and operator for your application.
Installation	Factory-trained technicians install the complete door system to Wayne Dalton specifications.
Commissioning	Full operator programming, travel limit adjustment, safety device testing, and walk-through before sign-off.
Service Coverage	Oklahoma City · Edmond · Norman · Moore · Yukon · Midwest City · Guthrie · El Reno · Tulsa

Model 451 Installation in Oklahoma City

The Wayne Dalton Model 451 aluminum full-view door brings commercial-grade structural performance and a contemporary glass aesthetic to Oklahoma City businesses. DOORTEC installs the Model 451 for auto dealerships, restaurants, breweries, and showrooms throughout Oklahoma City, Edmond, Norman, Moore, Yukon, Midwest City, Guthrie, El Reno, and the OKC metro. The 6063-T6 aluminum frame provides long-term durability in commercial environments where both appearance and structural integrity matter.

For OKC restaurant and hospitality operators looking to create indoor-outdoor dining environments, the Model 451 full-view configuration allows the door to function as an open wall section when raised. Optional insulated rails and stiles are available for climate-sensitive applications. Call DOORTEC at (405) 720-7107 for a free commercial site assessment.

Commercial Glass Aluminum Doors Tulsa & OKC

DOORTEC's Tulsa location serves the greater Tulsa metro with the Wayne Dalton aluminum glass door line including the Model 451. Tulsa's growing hospitality, automotive, and commercial real estate sectors have strong demand for full-view aluminum doors specified as both functional and architectural elements.

For commercial projects in both Tulsa and Oklahoma City where wind load requirements apply, DOORTEC's commercial team can confirm the appropriate configuration for your specific opening size and local code requirements. Contact us at (405) 720-7107 or online at doortec.com.