Wayne Dalton Roll-Up Sheet Door Model DS-200

Product Info

All specifications sourced from Wayne Dalton's official DS-200 product documentation. Contact DOORTEC at (405) 720-7107 for specific sizing, color, and configuration details.

Construction
Curtain Material	26-gauge, hot-dipped galvanized corrugated steel — primed then finished with high-gloss silicone polyester paint
Curtain Profile	Corrugated round profile — adds rigidity to the thin sheet material without adding significant weight
Springs	Oil-tempered steel springs — provide smooth cycle performance and long service life
Spring Assembly	Corrugated top sheet assembly forms a strong torque cylinder — conceals spring mechanism and adds strength for easy operation
Axle	Steel axle supports the door curtain and counterbalance system; axle casting assembly holds constant door tension and allows easy adjustments
Door Stops	Automatic door stops standard
Drum Wheel	Deep-drawn galvanized steel drum wheel with 1-5/16" steel bearings
Brackets	Heavy-duty steel bracket plates rigidly support axle, spring, and door
Installation
Guide Type	Extruded aluminum guides — allow installation on masonry or steel with no special preparation or overhead tracks
Mounting Plates	Steel mounting plates provide lateral extension of jambs
Hardware
Bottom Bar	Heavy-duty steel angle, extruded aluminum bottom bar, and replaceable tubular-type vinyl astragal
Locking	Slide-bolt assemblies of heavy-duty steel — both slide bolts accept padlocks
Anti-Wear Strips	Polypropylene anti-wear strips on continuous guides — quieter operation and longer service life
Warranty
Coverage	12-Month Limited Warranty on all product parts and components
Operation
Chain Hoist	Direct-drive chain hoist for door sizes up to 12'×12'
Reduce-Drive Hoist	4:1 reduce-drive chain hoist available for doors up to 12'1"×16'0"
Motor Option	Electric operator kit adapts door to motorized operation
Sizing
Maximum Dimensions	Contact DOORTEC for specific size availability

Wayne Dalton DS Series. 12-Month Limited Warranty on all product parts and components.

The DS-200 is Wayne Dalton's medium-duty commercial roll-up sheet door — a versatile, cost-effective coiling door for commercial storage bays, service areas, and utility openings where a compact overhead profile and straightforward installation are the primary priorities.

26-gauge hot-dipped galvanized corrugated steel curtain finished with high-gloss silicone polyester paint — corrosion-resistant galvanized base with a durable painted finish that withstands commercial use environments

Corrugated round profile adds rigidity to the thin-gauge curtain — the corrugation provides structural stiffness across the curtain width that a flat sheet at the same gauge could not achieve

Extruded aluminum guides install directly to masonry or steel without special preparation or overhead tracks — eliminates the track system required for sectional doors, reducing header space requirements and installation complexity

Corrugated top sheet assembly forms a strong torque cylinder — conceals the spring mechanism for a cleaner appearance while the torque cylinder design provides structural strength for smooth operation

Oil-tempered steel springs for smooth cycle performance — the tempering process improves spring resilience and fatigue life compared to standard steel springs

Automatic door stops prevent over-travel at the top of the opening — important for long-term spring tension maintenance and curtain protection

Slide-bolt assemblies with padlock capability at both bottom corners — dual locking points provide security at the bottom bar without requiring a cylinder lock on a door that may be accessed frequently

Chain hoist operation up to 12'×12' with 4:1 reduce-drive available for larger openings — appropriate for moderate-frequency commercial applications without the cost of motor operation

The DS-200 is suited for medium-duty commercial and storage applications where a roll-up sheet door provides a more compact and cost-effective closure than a full commercial rolling service door.

Commercial Storage

Service Bays

Equipment Buildings

Utility Openings

Warehouses

Commercial Buildings

The Model DS-200 is configured to your application. Contact DOORTEC at (405) 720-7107 to discuss sizing, color, and option selections.

Color: Multiple standard colors — contact DOORTEC for current color options; some colors may have extended lead times

Operation: Chain hoist (up to 12'×12') · 4:1 reduce-drive chain hoist (up to 12'1"×16'0") · Electric motor operator kit

Locking: Slide bolts with padlock capability standard

Size: Contact DOORTEC for specific size availability for your opening

Wayne Dalton backs the Model DS-200 with a 12-month limited warranty. DOORTEC's installation workmanship guarantee is provided on top of manufacturer coverage.

12-Month Limited Warranty Wayne Dalton provides a 12-month limited warranty on the Model DS-200 covering all product parts and components.

12-Month Limited Warranty on all product parts and components

DOORTEC Workmanship Guarantee — any installation issue corrected at no charge

DOORTEC installs the Wayne Dalton Model DS-200 throughout Oklahoma City, Edmond, Norman, Moore, Yukon, Midwest City, Guthrie, El Reno, and Tulsa. Our factory-trained technicians handle everything from site assessment through commissioning.

DOORTEC Commercial Installation Process
Site Assessment	We assess the opening, header clearance, wall construction, and operational requirements to specify the correct DS Series model for your facility.
Specification	We specify door model, size, color, locking type, and operator option based on your application requirements.
Installation	Factory-trained technicians install the complete door system — guides, spring assembly, curtain, bottom bar, and operator — to Wayne Dalton specifications.
Commissioning	Full door balance verification, travel adjustment, and operational walk-through before sign-off.
Service Coverage	Oklahoma City · Edmond · Norman · Moore · Yukon · Midwest City · Guthrie · El Reno · Tulsa

DS-200 Installation in Oklahoma City

The Wayne Dalton DS-200 roll-up sheet door is DOORTEC's specification for Oklahoma City commercial storage bays, equipment buildings, service areas, and utility openings where a compact, cost-effective coiling door is the right solution. The DS Series' key advantage over sectional doors is the elimination of overhead track systems — the extruded aluminum guides mount directly to masonry or steel without the horizontal track and low-headroom hardware required by sectional doors, making installation faster and the opening taller in the open position. DOORTEC installs the DS-200 throughout Oklahoma City, Edmond, Norman, Moore, Yukon, Midwest City, Guthrie, El Reno, and the OKC metro.

For Oklahoma City commercial projects comparing the DS-200 against a full commercial rolling service door, the DS-200 is the cost-effective choice for standard commercial storage and utility applications — the full rolling service door (Model 800 or 926) is appropriate when heavier-duty construction, insulation, or higher wind load ratings are required. Call (405) 720-7107 for a free site assessment and specification comparison.

Roll-Up Sheet Doors Tulsa & OKC

DOORTEC's Tulsa location serves the greater Tulsa metro with the Wayne Dalton DS Series roll-up sheet door line including the DS-200. The simple, compact construction of the DS Series makes it particularly practical for Tulsa commercial storage facilities, equipment buildings, and service bays where installation speed and minimal headroom requirements are priorities.

For Tulsa self-storage facility applications, DOORTEC specifically recommends the DS-75 mini storage door rather than the DS-200 — the DS-75 is purpose-built for self-storage unit dimensions and duty cycles. Contact us at (405) 720-7107 or doortec.com to discuss which DS Series model is right for your specific application.