Wayne Dalton DS-100 Light Duty Roll-Up Sheet Door

Product Info

All specifications sourced from Wayne Dalton's official DS-100 product documentation. Contact DOORTEC at (405) 720-7107 for sizing and configuration details.

Construction
Curtain Material	26-gauge, hot-dipped galvanized corrugated steel — primed then finished with high-gloss silicone polyester paint
Curtain Profile	Corrugated round profile — adds rigidity to the thin sheet material without adding significant weight
Springs	Oil-tempered steel springs — provide smooth cycle performance and long service life
Spring Assembly	Corrugated top sheet assembly forms a strong torque cylinder — conceals spring mechanism and adds strength for easy operation
Axle	Steel axle supports the door curtain and counterbalance system; axle casting assembly holds constant door tension and allows easy adjustments
Door Stops	Automatic door stops standard
Drum Wheel	Deep-drawn galvanized steel drum wheel with 1-5/16" steel bearings
Brackets	Heavy-duty steel bracket plates rigidly support axle, spring, and door
Installation
Guide Type	Extruded aluminum guides — allow installation on masonry or steel with no special preparation or overhead tracks
Mounting Plates	Steel mounting plates provide lateral extension of jambs
Hardware
Bottom Bar	Heavy-duty steel angle, extruded aluminum bottom bar, and replaceable tubular-type vinyl astragal
Locking	Slide-bolt assemblies of heavy-duty steel — both slide bolts accept padlocks
Anti-Wear Strips	Polypropylene anti-wear strips on continuous guides — quieter operation and longer service life
Warranty
Coverage	12-Month Limited Warranty on all product parts and components
Duty Rating
Application	Light duty — for low-frequency commercial and utility applications
Wind Load
Standard	Contact DOORTEC for standard wind load rating
Wind Load Option	Available up to ±34 psf on doors 10' maximum in width** — cast windlocks riveted to curtain as required
Florida Approval	Third-party tested for uniform static air pressure per Florida wind load approvals up to 150 mph
Operation
Chain Hoist	Direct-drive chain hoist for door sizes up to 12'×12'
Reduce-Drive Hoist	4:1 reduce-drive chain hoist available for doors up to 12'1"×16'0"
Motor Option	Electric operator kit available
Sizing
Maximum Dimensions	Contact DOORTEC for specific size availability

**Wind load available up to ±34 psf on DS-75, DS-100, and DS-350 doors 10' maximum in width. Cast windlocks riveted to curtain as required for wind load rating.

The DS-100 is the light-duty model in Wayne Dalton's DS Series — the right choice for equipment rooms, mechanical spaces, and low-frequency commercial openings where a compact, economical coiling door provides the necessary closure.

26-gauge hot-dipped galvanized corrugated steel curtain — the same corrosion-resistant base material as the heavier DS models, providing durable protection appropriate for the lower cycle requirements of light-duty applications

Extruded aluminum guides with no overhead tracks required — direct installation to masonry or steel without the track system or headroom hardware needed for sectional doors

Wind load option available up to ±34 psf for openings 10' wide or less — cast windlocks riveted to the curtain provide wind resistance suitable for Oklahoma City's wind exposure requirements

Florida wind load approval up to 150 mph on eligible sizes — third-party tested for uniform static air pressure, providing documented wind load performance for applications requiring certified ratings

Oil-tempered springs for smooth, consistent operation — provides reliable performance even in low-cycle applications where the door may sit dormant for extended periods

Corrugated top sheet forms a torque cylinder — conceals spring mechanism, provides structural strength, and simplifies the overhead profile for minimal headroom applications

Polypropylene anti-wear strips on continuous guides — reduce operational noise and extend guide service life even in light-duty, infrequent-use applications

Slide bolts with padlock capability at both bottom corners — dual locking points appropriate for equipment rooms and utility spaces requiring after-hours security

The DS-100 is suited for light-duty commercial, institutional, and utility applications where low cycle frequency and compact headroom requirements are the primary considerations.

Equipment Rooms

Mechanical Spaces

Utility Openings

Light Commercial

Storage Areas

Institutional Buildings

The Model DS-100 is configured to your application. Contact DOORTEC at (405) 720-7107 to discuss sizing, color, and option selections.

Color: Multiple standard colors — contact DOORTEC for current color options

Wind Load: Up to ±34 psf on openings 10' wide or less — cast windlocks riveted to curtain

Operation: Chain hoist (up to 12'×12') · 4:1 reduce-drive chain hoist · Electric motor operator kit

Locking: Slide bolts with padlock capability standard

Size: Contact DOORTEC for specific size availability

Wayne Dalton backs the Model DS-100 with a 12-month limited warranty. DOORTEC's installation workmanship guarantee is provided on top of manufacturer coverage.

12-Month Limited Warranty Wayne Dalton provides a 12-month limited warranty on the Model DS-100 covering all product parts and components.

12-Month Limited Warranty on all product parts and components

DOORTEC Workmanship Guarantee — any installation issue corrected at no charge

DOORTEC installs the Wayne Dalton Model DS-100 throughout Oklahoma City, Edmond, Norman, Moore, Yukon, Midwest City, Guthrie, El Reno, and Tulsa. Our factory-trained technicians handle everything from site assessment through commissioning.

DOORTEC Commercial Installation Process
Site Assessment	We assess the opening, header clearance, wall construction, and operational requirements to specify the correct DS Series model for your facility.
Specification	We specify door model, size, color, locking type, and operator option based on your application requirements.
Installation	Factory-trained technicians install the complete door system — guides, spring assembly, curtain, bottom bar, and operator — to Wayne Dalton specifications.
Commissioning	Full door balance verification, travel adjustment, and operational walk-through before sign-off.
Service Coverage	Oklahoma City · Edmond · Norman · Moore · Yukon · Midwest City · Guthrie · El Reno · Tulsa

DS-100 Installation in Oklahoma City

The Wayne Dalton DS-100 light-duty roll-up sheet door is DOORTEC's specification for Oklahoma City equipment rooms, mechanical spaces, and light commercial openings where a compact, economical coiling door is required but full commercial rolling service door construction is unnecessary. The DS-100's wind load option up to ±34 psf for openings 10' wide or less makes it a viable choice for exterior applications that need certified wind load compliance at a budget-appropriate price point. DOORTEC installs the DS-100 throughout Oklahoma City, Edmond, Norman, Moore, Yukon, Midwest City, Guthrie, El Reno, and the OKC metro.

For Oklahoma City projects comparing DS Series models, DOORTEC can assess your specific opening size, cycle frequency, and wind load requirements to recommend the right DS model. The DS-100 is the correct choice for light-duty/low-frequency applications; the DS-200 steps up for moderate commercial use. Call (405) 720-7107 for a free site assessment.

Light Duty Roll-Up Doors Tulsa & OKC

DOORTEC's Tulsa location serves the greater Tulsa metro with the Wayne Dalton DS Series. The DS-100 is well-suited for Tulsa institutional, educational, and light commercial facilities requiring simple, economical coiling door closures for utility and equipment spaces.

For self-storage unit applications in Tulsa, DOORTEC recommends the DS-75 mini storage door — purpose-built for self-storage dimensions and duty cycles. For general light commercial use, the DS-100 is the appropriate specification. Contact us at (405) 720-7107 or doortec.com.